ASUS AC1200 Dual Band WiFi Gaming Router

Many people find yourself frustrated and confused when trying to line up a wireless router themselves. they typically plan to follow the setup CD or instructions that came with the router and find yourself abandoning or paying somebody else to try to to it for them.

This article will outline the three basic concepts you would like to know to line up a wireless router yourself. I'm getting to show you ways to try to to it without using the setup CD that comes together with your router and with none of the flamboyant gadgets or push buttons designed to form fixing a wireless router easy. While these methods could seem easy on the surface they do not always work. They also keep you isolated from any understanding of what's actually happening . If an easy mistake is formed you'll grind to a halt and be forced to show to somebody else for help.

Once you understand the way to found out a wireless router you'll also understand the way to found out almost any wireless device on the market including printers, game consoles, iPads etc.

The three basic concepts you would like to know about wireless routers and wireless networking security are:

1. Your SSID - Service Set Identifier. this is often an enormous sounding word that simply means the name of your wireless network. it is best to vary this from the default and provides it a reputation meaning something to you but means little to somebody else . Something like ILHMAP for "I Love hand-crafted Apple Pie" is sweet .

2. Your Encryption Type - you would like to know the hierarchy of wireless encryption. It all started with WEP or Wired Equivalent Privacy. This came standard with most B and G routers. As computer processors speeds increased WEP became easier and easier to crack so a replacement standard came out call WPA. WPA uses TKIP as it's encryption. Soon after WPA came out WPA2 was introduced. WPA2 uses a good stronger sort of encryption called AES. Some older operating systems and game consoles will only work with WEP. once you are you able to want to use WPA or WPA2. repeatedly you'll choose WPA/WPA2 which allows you to use both sorts of encryption with an equivalent password. this is often a really popular choice when fixing security on a wireless router.

Best Budget Router For Your Home

3. Your Pass phrase - this is often also referred to as the password or "encryption key". It's often confused with the router password. The router password is just the password you employ to log into the router. The encryption key's what allows a computer, printer or other network device to attach or "associate" with the wireless router. WEP passwords are generated by typing during a word or phrase. The result's usually scrambled into something like "17B295FcA8". You then need to type these hexidecimal characters into each of your devices. Not very user-friendly. WPA and WPA2 don't generate difficult to recollect hex numbers like WEP. you'll simply type in 8-63 characters like "My dog barks 2 loud". during this example spaces count as characters and therefore the "M" in "My" MUST be capitalized.

Now that you simply understand the essential concepts involved wireless networking let's put them to use.

All that's really left to try to to now's access the routers web interface and enter the parameters mentioned above.

In order to access the routers web interface you would like to understand three things.

1. The routers IP address.

2. The routers user name and password.

3. If you computer is on an equivalent network because the routers IP address.

IP Address

The routers IP address is typically something like 192.168.0.1, 192.168.2.1 or maybe 10.0.0.1. The documentation that came with the router should provide this. If you do not have the documentation simply do an enquiry engine look for "router make and model default IP."

Username And Password

The routers username and password is typically along the lines of "admin" and "password". If these don't work simply do an enquiry engine search on "router make and model default password". If it is a second-hand router you'll got to hard reset it to urge it back to it's default. Hard resetting usually involves poking a fastener into a small hole within the back of the router and holding it for 15 to 30 seconds and releasing. Once you release the router will reboot and return to it's factory default settings and you will be ready to use it's default username and password to go online .

Same Network?

If you computer is on an equivalent network because the routers IP address you will be ready to connect. If not you will not be ready to connect. Network devices got to get on an equivalent network to speak with one another unless they're employing a special configured router to hitch their separate networks. Once you recognize your routers default IP address simply go your computers prompt and sort in IPCONFIG. this may return your computers IP address.

If the primary three "octets" of your routers IP and your computers IP line up your on an equivalent network. If they do not you will not be ready to connect.

Let's check out some samples of this:

If your routers default IP address is: 192.168.1.1 and your computer IP address is 192.168.0.4 you will not be ready to connect.

A better illustration of this is often as follows:

Same network:

192.168.1.3

192.168.1.30

Different network:

192.168.1.3

192.168.0.30

So if your PC isn't on an equivalent network because the router what does one do?

Simply connect one end of an coaxial cable to at least one of the four ports within the back of you router and therefore the other to the network port in your PC and reboot.

See Also: SteelSeries Arctis 9X Wireless Gaming Headset

When the pc reboots it'll automatically devour an IP from your routers built-in DHCP server which will allow you to attach to the router.

Now that each one the celebs are all properly aligned it is time to attach to the router.

To do this simply:

1. Enter your routers IP address into your favorite browser (IE, Chrome, Firefox etc.) and hit "enter".

2. Type within the username and password to access the router.

3. Find the "Wireless" or "Wireless Security" section in your router and enter the SSID, Encryption and Pass phrase parameters as discussed above.

That's it!

Once you're done you merely got to enter the pass phrase you created into the wireless utilities in each of your network devices. this is often an easy matter of clicking or tapping on your SSID, entering you pass phrase and clicking on "connect!"

You Might Also Like

0 comments